Spray Foam Hybrid

Price @ $7,000 - $10,000

Q: How much does the Spray Foam Hybrid cost?

A: The Hybrid sells for a fraction of high pressure machines. This portable spray foam machine allows you to use high pressure chemical formulations but the apply those chemicals as a low pressure spray foam. 

Q: Does the Hybrid come with a warranty?

A: Yes, the Hybrid comes with a one year warranty

Q: Does the Hybrid need a special foam formulation?

A: No, the Hybrid has been designed to process the same foam used by high pressure machines. The Hybrid sprays both open and closed cell foams as well as many polyurethane/polyurea coatings

Q: How does it work? I've been told the foam must be sprayed at high pressure(1,000 PSI) and 120 degrees faranheit heat

A: The Hybrid spray gun is unique. It features an air nucleation gun which injects compressed air into the liquid components prior to exiting the gun. The liquids are frothed making them mix easier and the air acts as a propellant to expel the mixed foam. The air nucleation allows the foam to be processed at much lower pressure(200-600 PSI) and temperature (80-100 F).

Q:Where can I buy the foam?

A: Contact us for recommended suppliers. We work with several that will sell you direct, no certification is required

Q:How much hose does the Hybrid come with?

A: The Hybrid comes with 50 foot insulated, heated hose wrapped in a scuff resistant jacket. A 50 foot heated extension hose can be ordered to reach 100 foot

Q: How do I flush out the machine after use?

A: The Hybrid should be flushed with a pump lubricant(Plasticyizer) for long term storage. It is not necessary to flush each day and chemical can be left in the lines for up to week.

Q:What is included with the machine?

A: The Hybrid comes with the proportioning unit, 50 foot heated hose, gun, spray tips, ratio tip, night cap, flush pump, drum feed hoses and fittings to attach to drums.

Q: What else do I need to buy to use the Hybrid?

A: You will need two drum cradles, fresh air system, personal protective gear, cleaning solvent, an air compressor rated for minimum 12 CFM@90 PSI, and of course the spray foam

Q:Does the foam have the same yield and insulation values compared with high pressure machines?

A: Yes, the finished product has similar properties and you can expect professional results

Q:How much foam can you spray in one day with the Hybrid?

A: Customers average about 1,000 lbs per day with the Hybrid. That's about 4,000-4,400 board feet of closed cell